Red & White Checkered Tablecloths

Before anything, it's best to explain what is the IP of a computer, right?. This term, IP stands for "Internet Protocol", ie internet protocol used for communicating data across a packet network combined. It is as it were, the identity card of your computer.

There are two types of IP:

- PUBLIC IP : a single IP that identifies our network from the outside.

And for you to know yours, you can visit the website www.cual-is-my-ip.net and so you know.

- PRIVATE IP : identifying a device connected to our internal network and have mapped on your computer and is used when we need to open ports on the router.

Private Ip To find out what we have, we do the following:

1 º Come to "Start" and click on "Run" which spell out the word cmd, giving then press "Enter."

2 ° There'll be a computer screen, black where to write ipconfig where the cursor blinks and give back to enter. 3 º Expected

a jiffy, will get a retail paragraph where some data appear, among which is "Ip Address".

What Causes Undigested Quinoa In Stool

VSMP (virtual symmetric multiprocessing)

thing I have been asking lately is when to use VSMP.
Should we assign to a VM with a virtual processor?

should use it only when we know that it will take for the applications that takes inside the VM, not simply by thinking "the more vCPU have VM better. "Some people think that the more vCPU have a better VM, and this is not necessarily true, it can actually run worse than with a two vCPU.

The reason for this is that the scheduler hypervisor CPU cores must find the number available simultaneously vCPUs equal to the number that is assigned the VM . For example, a VM with four vCPUs will have four cores available time for each request made to the host CPU. If such four cores are not available at this time (because there is another VM using two, for example) the VM must wait until they are available.

Tips about this: How

• vCPUs least bring the VMs better.
• only assigned to a VM multiple vCPUs when we know the application that is inside will make use of it.
• never assign the same number of vCPUs that the total number of cores in your host. (PCPUs). Best if you keep me physical cores twice that of the VM vCPUs else has. (Eg, 8 physical cores = 4 vCPU maximum)
• If you are doing P2V of a Windows server with multiple CPUs to a VM with a vCPU change the HAL from multiprocessor to uniprocessor.
• If you can, avoid using CPU affinity.

Updated:
This link, although a bit old explains very technically the VSMP behavior and without it.

Adult Movie Theater Orlando

IP PON THE TITLE OF YOUR BLOG ON THE INTERNET BROWSER

This time I am going to ask to go into the bowels of the blog, no, jejeje, I librais. You ought to just open a page element, html / javascript and copy the following html code I put below:

\u0026lt;script type="text/javascript"> were repeat = 1 / / enter 0:02 ikke repeat scrolling after 1 run, othersise enteric 1 was title = document.title was leng = title. length was start = 1 title function move () {titl = title.substring (start, leng) + title.substring (0, start) document.title = titl start + + if (start == leng +1) { start = 0 if (repeat == 0) return } setTimeout ("title move ()", 180) } if (document.title) title move () \u0026lt;/ script>

Dayton Timberline Mt Tires

MIRROR MIRROR IMAGES


While in another post I told you a website where you can apply reflections to images, here I present another interesting site where you can also make birguerías mirror, www.mirroreffect.net

1, find the image you we want to change where it says "Upload your picture," providing "Browse."

2 º Once uploaded, choose the desired effect: reflection up, down, left or right. At what level of reflection and if we want transparency.


For this, I will show the reflected SrCabronazo .....

How Can You Tell Between Sperm And Cm?

MAKE A FRAMEWORK TO POST TITLES

aburrais Lest you without touching your code template ejejjeje, I bring a small trick with which to make the titles of your entries-post, has a decorative frame around it.

1 For this we must look at our template the following code:

. Post h3 { margin: .25 em 0 0; padding: 0 0 4px; font-size: 140%; font-weight: normal; line-height: 1.4em; color: $ titlecolor;}

2 º We add this one small piece of code:

. post h3 {margin: .25 em 0 0; padding: 5 5 5px; font-size: 140%; text-align: center ; text-transform: uppercase; font-weight: bold; border: 1px solid; line-height: 1.4em; color: $ titlecolor;}

3 º We changed to our liking under:

- Where it says "border: 1px solid;" is where we choose the thickness of the line that frames our title, so a greater number .... thicker.

- Along the same lines as before we can choose different types of line: solid (straight line), dotted (dashed line), dashed (line with dashes), double (double straight line).

4 th save the changes and now ta, "By Allah."

Noma Programmable Thermostat Manual At Spanish

today I present you interesting web apañitos and decorations to make your images and so give a personal touch and original. This is www.reflectionmaker.com

Once we opened the website we will leave two options for dealing with our image: write the web address where it is hosted or browse the files on your computer. Ought to consider one thing: should not exceed 200kb in size. Selected

photography, mark the level of reflection we want for the "afoto" and the background color for it, go to "generate" and you're done. In a few seconds, we change.

For example ...... one of SrCabronazo photic, jijiiji.

American Top Model Themes

REFLECTION IMAGES DO WHAT YOUR SCREEN SIZE USING GUIDED

I know that many are accustomed to discuss the issue that some visitors complain that they do not see your full blog. Part of the "problem" is that most laptop use and the screen is much wider ..... and do not realize that everyone does not use a widescreen monitor.

can to put a little message indicating the size necessary to monitor your blog and see well, besides this, add this little script with which your visitors will know what screen size and color are used. Let

an element html / javascript and copy this piece of code:

<table border="0"> <tr> <td><form name="t" method="POST"> <table border="0"> <tr> <td valign="top" width="90" bgcolor="#B2EE3A">Ancho:</td> <td><input name="t1" value="not supported" size="10" type="text"/></td> </tr> <tr> <td valign="top" width="90" bgcolor="#B2EE3A">Largo:</td> <td><input name="t2" value="not supported" size="10" type="text"/></td> </tr> <tr> <td valign="top" bgcolor="#B2EE3A" width="90">Color:</td> <td><input value="not supported" name="t3" size="10" type="text"/></td> </tr> </table> </form> \u0026lt;/ td> \u0026lt;/ tr> \u0026lt;/ table> \u0026lt;p align="left"> \u0026lt;script> \u0026lt;! - function show () {if (document.all one ought to change your html code and go. And would something like this:

bgcolor = "# 1663b1"> Width:

name = "t1" value = "not supported" size = "10 "type =" text "/> function show () {
if (document.all distinction ..... this is your post.
1 º Come to our beloved template html blog, Quico, the guts of it (where does time do not be commanded to go, by the way) and find a piece of code that makes the following:

bgcolor =" # 1663b1 "> Length: bgcolor = "# 1663b1" width = "90"> Color: name =" t2 "value =" not supported "size =" 10 "type =" text "/ > value = "not supported" name = "t3" size = "10" type = "text" />

. Sidebar. Widget {

Where it says "IMAGE URL" we write the web address in which We saved the background image you want to place (remember that you can upload it to Megaupload, Photobucket ....)

3 rd Save the changes and go.

As always ..... I remember before you do anything in the template, save a backup, do not send me away to me the anger then if you have loaded the blog.

If you do not wish to be the same image for all elements, but each element bears a different image, you ought to do the following: 1 º We are looking at the template code like the following:

\u0026lt;b: widget id = 'HTML10' locked = 'false' title = 'TITLE PAGE ELEMENT " type = 'HTML' />


This is the part of the "Widgets" and you will find several lines like this with a number of different HTML and obviously a different item title. have to write the following with all the html that we copied before in a sheet:

2 º Now I anotais each id in a piece of paper, that is what makes HTML and a corresponding number and title of the widget. 3 º Well, now look the part of the template code for the CSS and before line ]]>\u0026lt;/ b: skin>

# HTML10 {background: url (DIRECCION_DE_LA_IMAGEN)
}



4 th save the changes and ready, Callisto!

Kanna Sceletium Tortuosum

DECORATING ITEMS BLOG PAGE OF THE FUND WITH IMAGES OF

At the request of Mildred today I will explain a tool for your blogs, a map that people can include your name, photo and where it is located and, so, you doing your "friends map" . www.frappr.com

First we have to enter the website

and see what comes out of such a map. Under this map we find a orange box that says "Get your own map" (Get your own map) so we click on it.

Now we get a default map and gives us a tab to choose the size you want by clicking on "Select map size "(Choose the size of the map) where you can choose between" Standard "that would be great or" Compact "that would be small. Once you have chosen our size, click in the orange box that says" Save "(Save).

will then see a section that says "Add map to your webpage (Add a map to your website) where you will see on the left a series of tabs that indicate different worlds blog (MySpace, Friendster, Xanga, Blogger, Hi5 , Other sites). In this case clicking on the tab that says "Blogger" and will get a screen that tells us how to add the map.

Above we see a code to copy (Ctrl + C) and paste (Ctrl + V) in a post (although an element HTML / javascript is the same.) The steps we suggest are: - "Click on" Create "under the" Posting "section ".... ie, click on" Create "under the section" Tickets "

- Paste the code Into the text box (Right-click in the box and choose "Paste" or just hit Ctrl-V ).... that is, copying the code in the text box (either giving the right mouse button and selecting "paste "or pressing Ctrl + V)

- Press" Publish Post "and you're done !.... is, click on Publish Post and you're done! Now that we already have our little map ......... we have to do a little something ..... and add us to ourselves in it .....

For that, we'll see on the map in question with a gray box that says "Add Yourself" (añádete), so we have to click on it.

will leave another box with two blue lines ..... one of them says "Hi! Please add yourself!" (Hola! Please añádete!) Where we have to click and leave a box (not to vary with the boxes on the nose) that says "Pick a pin icon" and 4 sections to fill out (name, name, email , upload photo, upload picture and shoutout-comments). Once this is complete go to "Add me" (I add). The other sentence

color blue is "Move this pin" (move the pointer), so we click on that phrase and will otrooooo box where we need to add the site to find us (adress-address, city, city, state, country, zip, zip code or country below-province). Once written as we like go to "Ok."

so you can see how it is, I show you a map I made for this blog, hala!

What Does Strep Look Like?

MAP OF VISITS AND FRIENDS FOR YOUR BLOG

The world of PC games, console, playstation ... is something that started in a very silly and , today, is something that is part of our daily lives.

There are many games of yesteryear are no longer available in stores and if you get them is through piracy. Want to get these games without resorting to piracy? LIBERATE GAMES

is your solution. In this website you can download full games and legal, as they have been released by their creators (nausea, have given permission for it to download without paying anything). Since the classic games are yours!

Tell them, the game list is constantly updated. These self that have currado! you should go to Http://liberatedgames.org

Lyrical Costumes For Dance 2010

GET FREE AND LEGALLY

Rollerblading Feet Pains

SANDWICH CLASSIC VIDEO IMAGE FOR DECORATING YOUR BLOG

If you want limit the use of a local account ought to have an account with administrator privileges. To do so thou must use the command "net user

" and indicate the user you want to restrict its use and after use permits.

An example: The command
Nya net user / times: MF ,9:00-12: 00 Nya be restricted to the use of your account so you can use only Monday through Friday from 9 to 12 morning.

can also make the system take the user when their time online consuming. For this activate the appropriate policy for it.

1 In the menu " Home " go to "
Run" and type "
c: \\ Windows \\ system32 \\ gpedit
" and we will see the console to manage computer policies. 2 º Following the path Computer Configuration, Windows Settings, Security Settings, Local Policies, Security Options, here we must find the policy "Network Security

."

3 º forced the closure of session when the time expires login and activate it.

If we remove the restriction on the account we use "net user

" and the option "/ times" we

"/ times: all"

2wire Blaster Type Virus

USER ACCOUNTS WITH TIME LIMIT REMOVER

case you are until noses every time abarais your Messenger window appears to "MSN Today" and so will shun you have to do your advertising, you have only to do the following:

1 º run the program Messenger and log on. 2 In the main Messenger window, go to "Tools." 3 º Select "Options" and "Preferences" option disable quen says "Display MSN Today" 4 ° Click "OK" and restart the session.